Replacing the gas pedal
Thread Starter
Senior Member
Posts like a Turbo
Joined: Feb 2004
Posts: 231
Likes: 0
From: Wappingers Falls, NY

How do you pop off the pin holding the gas pedal? I just bought a set of GXP pedals and need to know before I try to knock out the pin with a hammer. Thanks...........
Remove the left instrument closeout/insulator panel.
Remove the e-clip from the pedal.
Remove the plastic retainer from inside the pedal.
Remove the accelerator control cable from the pedal by pulling the cable straight out and up, toward the top of the pedal.
Remove the gas pedal from the brake and gas pedal assembly.
Remove the e-clip from the pedal.
Remove the plastic retainer from inside the pedal.
Remove the accelerator control cable from the pedal by pulling the cable straight out and up, toward the top of the pedal.
Remove the gas pedal from the brake and gas pedal assembly.
i dont think this is what he is talking about, but prolly looks the same
$59
http://cgi.ebay.com/ebaymotors/ws/eB...spagename=WDVW
$59
http://cgi.ebay.com/ebaymotors/ws/eB...spagename=WDVW
Thread
Thread Starter
Forum
Replies
Last Post



