Will my Lower intake Manifold gasket need replacing?
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Jun 2008
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Will my Lower intake Manifold gasket need replacing?
Just purchased a used 3.8 L67 for my 02 SSEI. The engine has 42k miles on it. should i replace the LIM now? I had to replace the one on my original motor at 73k miles.
and if i replace now is this all i need to buy?
FEL-PRO Part # MS959771
and if i replace now is this all i need to buy?
FEL-PRO Part # MS959771
#3
Member
Posts like a V-Tak
Thread Starter
Join Date: Jun 2008
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
do u know what year GM started to use the improved design? and if so do u know where to look on the block for the production date? i'm not sure what year this engine was made. just know it'* direct replacement for 00-05
The above picture is for. 2nd Design; w/Rubber-plastic end seals w/Locating pins; Lower set
The above picture is for. 2nd Design; w/Rubber-plastic end seals w/Locating pins; Lower set
Last edited by WoodyBalto; 02-05-2009 at 02:31 PM.
#4
Retired Senior Admin
Expert Gearhead
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes
on
24 Posts
Not sure when they started using the new gaskets. But these are what you want to use.
INTENSE-Racing.com: Lower Intake Gaskets (L67/L32)
INTENSE-Racing.com: Lower Intake Gaskets (L67/L32)
#6
Member
Posts like a V-Tak
Thread Starter
Join Date: Jun 2008
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Just called the local Pontiac dealer... my cost is $66.40. it'* worth the extra $7.00 to pic them up locally
I also called Advanced Auto and the Felpro Gaskets are NOT Metal
Genuine GM
----------------------------------------------------------------------------------------------------
Felpro
I also called Advanced Auto and the Felpro Gaskets are NOT Metal
Genuine GM
----------------------------------------------------------------------------------------------------
Felpro
#8
Member
Posts like a V-Tak
Thread Starter
Join Date: Jun 2008
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
OK Dan......
help me with my parts list... I was so focused on getting an engine i didn't think about tuneup parts
I think i'm just gonna order everything from INTENSE.
Here'* my list so far what am i forgetting?
help me with my parts list... I was so focused on getting an engine i didn't think about tuneup parts
I think i'm just gonna order everything from INTENSE.
Here'* my list so far what am i forgetting?
#9
Retired Senior Admin
Expert Gearhead
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes
on
24 Posts
You will need a supercharger gasket, and a throttle body gasket. Other then that I think you have it all.
Edit. And 2 rubber O rings for the coolant, and you migh tneed the coolant elbows. If I think of anything else I'll add it.
Edit. And 2 rubber O rings for the coolant, and you migh tneed the coolant elbows. If I think of anything else I'll add it.
Last edited by Danthurs; 02-05-2009 at 03:51 PM.