Quick Sparkplug Question
Senior Member
Posts like a Northstar
Joined: Feb 2003
Posts: 658
Likes: 0
From: Sacramento, CA WCBF '06, '07 survivor

Plug wires CAN get you more HP.
Chevy high performance, September 2005 page 88
late-model Chevy pickup with a stock Gen III 5.3L V8
all the old plug wires had 950 ohms per wire .
new Granatelli plug wires LESS than 1-ohm (0.50 ohm actual reading)
just new wires got 15.3 hp improvement @ 5250 rpm
17.3 lb-ft of torque improvement @ 4250 rpm
they put a cold air kit + maf + wires and got
plus 55.05 hp at 5250 rpm
plus 45.10 lb-ft at 4850 rpm
Chevy high performance, September 2005 page 88
late-model Chevy pickup with a stock Gen III 5.3L V8
all the old plug wires had 950 ohms per wire .
new Granatelli plug wires LESS than 1-ohm (0.50 ohm actual reading)
just new wires got 15.3 hp improvement @ 5250 rpm
17.3 lb-ft of torque improvement @ 4250 rpm
they put a cold air kit + maf + wires and got
plus 55.05 hp at 5250 rpm
plus 45.10 lb-ft at 4850 rpm
Guest
Posts: n/a
Originally Posted by PontiacDad
Stay away from Taylor spiro pro, they're junk mine didnt last a year.
The Bosch didnt last a year, junk too.
The Belden Premiums that I have now look good and are well made plus they come with a life time warranty over the counter with receipt (dont throw away).
The Bosch didnt last a year, junk too.
The Belden Premiums that I have now look good and are well made plus they come with a life time warranty over the counter with receipt (dont throw away).
Add to the Belden, if you can't get these, Look for an Advance or one of the clones of advance like checkers, and see if thsy have a set of Autolite Profesional series wires.... Mine are on 3 years now with no problems...
I had failures with both Taylor and Bosch
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
Originally Posted by 2000SilverBullet
What were your symptoms of bad wires :?:
....or did you do a random check of impedance. :?
....or did you do a random check of impedance. :?
When I dismantled the plug wire I found all they did was strip the insulation and fold back core wire and crimp on the plug retainer. very poor crimp too with stab marks in the insulation from the cheezy stamping tool
Guest
Posts: n/a
Originally Posted by PontiacDad
Originally Posted by 2000SilverBullet
What were your symptoms of bad wires :?:
....or did you do a random check of impedance. :?
....or did you do a random check of impedance. :?
When I dismantled the plug wire I found all they did was strip the insulation and fold back core wire and crimp on the plug retainer. very poor crimp too with stab marks in the insulation from the cheezy stamping tool


__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
Thread
Thread Starter
Forum
Replies
Last Post



