Hey guys was wondering how or what is the proper way of taking off your door panel? I'm getting a leak in my car and I need to determine were it is so I'm going to that aread first. But I don't want to break any clips or anything, I mean if I did I did I can just go and get new ones from autozone right?

Also so I didn't post 2 threads, I noticed today when I was looking at my car from the front view my passenger side front fender is popped up just a little bit on the corner of it were its by the headlight. I looked at my other one to see if it was the same but nope, the other is leveled with the hood. Now I'll post pics of it in just a second ( gotta run out and take them ) but how will I go about fixing that? Lightly tap it with a mallet?

this is one is the driver side showing


Now in the second pic, that black is from the light, I don't think thats normal is it?

This is a link on how to remove the door panel
http://www.bonnevilleclub.com/forum/...ic.php?t=50082

Is the fender too high, or is the hood too low? If the hood is too low, open the hood, and in the front corners you'll see some rubber/plastic supports that can be adjusted up and down to align the hood properly. Move it a little at a time, and don't over-do, or you could have problems getting the hood open.

Imma measure the driver side fender tomarrow to determine if its the hood or fender and then let ya know whats up