2000-2005 Discuss your 2000-2005 Bonneville SE, SLE, and SSEi Please use General Chat for non-mechanical issues, and Performance and Brainstorming for improvements.

New owner of a Bonneville with minor problems

Thread Tools
 
Search this Thread
 
Old Jul 21, 2009 | 01:18 PM
  #1  
bopeep0129's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2009
Posts: 4
Likes: 0
bopeep0129 is on a distinguished road
Default New owner of a Bonneville with minor problems

Hi Everyone, I just recently purchased a 2000 Bonneville not sure if it is an SE or SLE and we knew of a few problems. Can someone please help me. The only windows in the car that open is the drivers side, and also with the power locks only the driver side will lock. And the power side mirrors driver side again is the only one that works. Also the oil pressure sensor needs to be replaced just not sure where it is located. And one last thing is the ABS light keeps coming on whiling driving a little bit. Could that have something to do with the bushing on the front passenger side table that has to be changed?

Please any help is welcome.

Thank you
Reply
Old Jul 21, 2009 | 01:47 PM
  #2  
Danthurs's Avatar
Retired Senior Admin

Expert Gearhead
 
Joined: May 2006
Posts: 29,661
Likes: 43
From: Sheboygan Wisconsin
Danthurs is a name known to allDanthurs is a name known to allDanthurs is a name known to allDanthurs is a name known to allDanthurs is a name known to allDanthurs is a name known to all
Default

:Welcome

Not sure on the windows, could be a loose connecting on the drivers side control, or a bad control unit on the drivers side.

The oil pressure sensor is located right above the oil filter.

The ABS light, check the connections on the wheel spin sensors. Make sure they are clean.
Reply
Old Jul 21, 2009 | 01:47 PM
  #3  
Purplehazeir's Avatar
Senior Member
True Car Nut
 
Joined: Sep 2008
Posts: 7,979
Likes: 2
From: Arlington, WA
Purplehazeir is on a distinguished road
Default

The oil pressure sender is under the car, right hand side and just above the oil filter on the filter adapter and pressure regulator plate. It'* easy to fix.

I'll do some looking in my FSM on your power issue. I believe it might be a door control module.
Reply
Old Jul 21, 2009 | 04:37 PM
  #4  
bopeep0129's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2009
Posts: 4
Likes: 0
bopeep0129 is on a distinguished road
Default

Thank you both very much. I will check what you have suggested and let you know if i come up with any good news.

Thank you again.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
WTFGM?
Introductions for new members
34
May 11, 2011 11:29 AM
dudesv
Everything Electrical & Electronic
0
Aug 21, 2008 09:44 PM
LuxuriesPremier
1992-1999
7
Apr 3, 2005 10:40 PM
Alliat
Classics (Star Chief and 1957 to 1986)
2
Aug 12, 2003 07:23 AM
Jim W
1987-1991
23
May 16, 2003 06:59 PM




All times are GMT -4. The time now is 10:36 PM.