Hi everyone, lots of great info on this site. From reading thru all the threads on here I think I need to replace my BCM,the blower will not come on most of the time. I checked voltage and I have 14.2 vdc when the fan is set to high or low or anything inbetween. I have proper grd to the "blk" wire and when I plug the molenix connector back in the fan comes on. Sound like a BCM to you guy'*? My question is where is it located? The BCM that is. And where is the best place to purchase one from? Thanks in advance.

Seth

Can't say where it'* located, but one of the best places to buy it would be at Auto Parts Fast at RockAuto

Thanks Dan.
Anyone know where it'* located (BCM) now?

What year are we talking about? By BCM, are you talking about the Body Control Module?

No. Sorry I mean the Blower control module.

I found a blower motor control box. But can't find it'* location. But from what I can see the wire is not very long. So locate the blower motor, then locate the plug, follow that wire right to the control box. Does that help?

I get what your saying to do, but man it'* tight under there.I don't know how far I could trace it. I read on the older bonneville'* it'* behind a panel somewhere in the engine compartment?

The picture I looked at it looked like the wire was only a few inches long, perhaps 6"

Same here,but It goes up out of site and to where it goes after that,I don't know. LOL. I don't think it'* accessable from the engine compartment from what I can tell. I 'm reading some more threads on here but I haven't found an answer yet.
Thanks for your help Dan.

Try getting purplehaizers attention, he has a 2000+ FSM.