parts help bonneville
#3
Retired Administrator
True Car Nut
For 3.8L not super charged:
FEL-PRO Part # MS98014T PermaDryPlus®; Intake Manifold Gasket Set
2nd Design; w/Rubber-plastic end seals w/Locating pins; Lower set only; Upper set not incl.; PermaDryPlus® int. manifold gskts. incl.
ACDELCO Part # 89017816
GASKET KIT,INT MANIF
FEL-PRO Part # MS98014T PermaDryPlus®; Intake Manifold Gasket Set
2nd Design; w/Rubber-plastic end seals w/Locating pins; Lower set only; Upper set not incl.; PermaDryPlus® int. manifold gskts. incl.
ACDELCO Part # 89017816
GASKET KIT,INT MANIF
#4
For 3.8L not super charged:
FEL-PRO Part # MS98014T PermaDryPlus®; Intake Manifold Gasket Set
2nd Design; w/Rubber-plastic end seals w/Locating pins; Lower set only; Upper set not incl.; PermaDryPlus® int. manifold gskts. incl.
ACDELCO Part # 89017816
GASKET KIT,INT MANIF
FEL-PRO Part # MS98014T PermaDryPlus®; Intake Manifold Gasket Set
2nd Design; w/Rubber-plastic end seals w/Locating pins; Lower set only; Upper set not incl.; PermaDryPlus® int. manifold gskts. incl.
ACDELCO Part # 89017816
GASKET KIT,INT MANIF
#5
DINOSAURUS BOOSTUS
Expert Gearhead
Having a head gasket go on these motors is less common than getting struck by lightning.
Me personally I use the GM LIM gaskets as they are a thicker aluminum. But the Fel Pro'* with the T on the end are also good. As for the plenum (typically the problem on an NA motor) I like the Dorman kit. Rockauto has them for under $80 IIRC.
Lower kit.. aim for the lower conversion kit. It'll have a ton of stuff and be lower cost than buying seperately.
Me personally I use the GM LIM gaskets as they are a thicker aluminum. But the Fel Pro'* with the T on the end are also good. As for the plenum (typically the problem on an NA motor) I like the Dorman kit. Rockauto has them for under $80 IIRC.
Lower kit.. aim for the lower conversion kit. It'll have a ton of stuff and be lower cost than buying seperately.
Thread
Thread Starter
Forum
Replies
Last Post