the SE has a very different design of a front facia than the SLE and SSEi there fore you will have to do it through taking out the headlight assemblies to access them

Ah yes, i was wondering how you would be able to get to it without taking the headlights out and leaving the air dam in, then I looked oh he has an SSEi I'm not a fan of those front ends

Wow, thanks for all the info. But it looks like the best way for me to do this is to go in from underneath ( I don't want to screw with my head light assembly. It'* not broke and I'd like to keep it working). But there is a huge black panel under the front bumper blocking access to the fog lights. I noticed bolts that I can unscrew so I'll give it shot some time this week and let you guys know how it worked out.

By the way ALLDATA just happens to have the 03 Bonneville SE as their demo vehicle. But their explanation of replacing the fog lights wasn't all that helpful.

Link
ALLDATA Online - 2003 Pontiac Bonneville V6-3.8L VIN K - Service and Repair

its up to you but to me taking out 2 10mm bolts and pulling the headlight housing (i've done it a million and one times) is much easier than taking out the stupid clips GM used to hold that air dam on, I broke half of them taking them out

He did his on an SSEi, they don't have an air dam, removing the headlight is the fastest and easiest

Hmm. Well I've never taken the head light assembly off before, but if you guys think its easier. I'll give it a shot. I trust your guys wisdom.