getting the right cat
Thread Starter
Member
Posts like a V-Tak
Joined: Apr 2006
Posts: 71
Likes: 0
From: wisconsin
getting the right cat
Ok all the problems I have been having is I have a bad cat to come find out so I would like to know which cat would fit perfectly with my stock exaust?I found one @ http://www.zzperformance.com/grand_p...ts1.php?id=364
Will this one mount right up and do I need a o2 simulator with this cat?
Thnax for any help!
Will this one mount right up and do I need a o2 simulator with this cat?
Thnax for any help!
Thread Starter
Member
Posts like a V-Tak
Joined: Apr 2006
Posts: 71
Likes: 0
From: wisconsin
Oh I forgot to mantion that the shop said to me that I need to get a exact fit otherwise they wont do it and they want to sell me one or there cats for like $479.00,the guy did say that if I could find one that is a direct fit with the stock exaust he would only charge me $125 to replace it so saving like $400 would be awesome!
Thread Starter
Member
Posts like a V-Tak
Joined: Apr 2006
Posts: 71
Likes: 0
From: wisconsin
DINOSAURUS BOOSTUS
Expert Gearhead
Joined: Mar 2005
Posts: 41,391
Likes: 30
From: Enfield, CT
The ZZP picture is not a direct fit..that'* a universal. The second link says direct fit. So it should be what your guy wants.
As far as best flow..I'd check www.justmagnaflow.com for a direct fit.
As far as best flow..I'd check www.justmagnaflow.com for a direct fit.
RIP
True Car Nut
Joined: Jul 2004
Posts: 5,656
Likes: 4
From: Grand Rapids, Mi
That may be the same one that ToastedOats was looking at in this thread....
http://www.bonnevilleclub.com/forum/...ic.php?t=52522
http://www.bonnevilleclub.com/forum/...ic.php?t=52522
Senior Member
True Car Nut
Joined: Sep 2004
Posts: 6,837
Likes: 3
From: Fitchburg Ma _ToastedRice_
Originally Posted by Archon
That may be the same one that ToastedOats was looking at in this thread....
http://www.bonnevilleclub.com/forum/...ic.php?t=52522
http://www.bonnevilleclub.com/forum/...ic.php?t=52522
Originally Posted by toastedoats
After a couple weeks of struggling with a heavily clogged cat, i ended up ordering what is supposed to be a direct fit replacement through ebay from "Autoparts Warehouse" It is not marketed as a high flow cat, however it is a 3 INCH cat with a step down pipe on it to bolt up to the stock B-pipe, so even though i dont think it is technically a high flow cat, it is larger and in theory, a higher flow rate, probably equal to that of a high flow 2.5"
on a side note, if anyone wants to buy one, its cheaper on ebay, search the part #, i found it listed for a LeSabre and got it for 137 Shipped
on a side note, if anyone wants to buy one, its cheaper on ebay, search the part #, i found it listed for a LeSabre and got it for 137 Shipped
http://replacement.autopartswarehous...verter&dp=true
Senior Member
True Car Nut
Joined: Jan 2005
Posts: 3,882
Likes: 2
From: Montevideo, MN MWBF '05, '06, '07 WCBF '06 '07 survivor
Originally Posted by BillBoost37
The ZZP picture is not a direct fit..that'* a universal. The second link says direct fit. So it should be what your guy wants.
As far as best flow..I'd check www.justmagnaflow.com for a direct fit.
As far as best flow..I'd check www.justmagnaflow.com for a direct fit.
Senior Member
Certified GM nut
Joined: May 2005
Posts: 2,155
Likes: 0
From: Wickliffe, Ohio
I tried to contact Magnaflow about a direct fit but I never got a response. May I suggest http://hoganperformance.com? I bought a direct fit high flow and it fit no problem at all.
http://www.bonnevilleclub.com/forum/...ic.php?t=57522
Ed
http://www.bonnevilleclub.com/forum/...ic.php?t=57522
Ed
