Check Gas Cap message...
Member
Posts like a V-Tak
Joined: Jan 2010
Posts: 94
Likes: 3
Can someone provide more detail on how to check these items on a 2003 Bonneville n/a? I am having the gas cap problem and have snaded the filler neck and purchased a new cap. message still on.
"There'* also a purge vent unit you need to clean... I think it'* hooked to one of the lines that goes to the evap canister under the passenger side rear floor board."
"It was the purge canister solenoid causing the problem. The solenoid is mounted on a bracket on top of the engine very close to the firewall"
"There'* also a purge vent unit you need to clean... I think it'* hooked to one of the lines that goes to the evap canister under the passenger side rear floor board."
"It was the purge canister solenoid causing the problem. The solenoid is mounted on a bracket on top of the engine very close to the firewall"
Member
Posts like a V-Tak
Joined: Jan 2010
Posts: 94
Likes: 3
Does anyone know the details on what the purge unit vent looks like
There'* also a purge vent unit you need to clean... I think it'* hooked to one of the lines that goes to the evap canister under the passenger side rear floor board.
There'* also a purge vent unit you need to clean... I think it'* hooked to one of the lines that goes to the evap canister under the passenger side rear floor board.
Member
Posts like a V-Tak
Joined: Nov 2009
Posts: 89
Likes: 1
From: Saginaw, Michigan
I got this last week too, somehow I didnt put it on correctly (must have been in a rush) I felt stupid plugging in the Tech2 to see a code....something that GM should have just made an icon for somewhere on the instrument cluster.
Its bad enough my Oil Pressure Sensor just went bad and I'm reading 120psi on the I/P, sensor voltage reads almost 5volts, so I know its fried. I dont think it'll do any damage I haven't got any SES lights or odd performance because It'll have to wait a few days.
Its bad enough my Oil Pressure Sensor just went bad and I'm reading 120psi on the I/P, sensor voltage reads almost 5volts, so I know its fried. I dont think it'll do any damage I haven't got any SES lights or odd performance because It'll have to wait a few days.
Member
Posts like a V-Tak
Joined: Nov 2009
Posts: 89
Likes: 1
From: Saginaw, Michigan
Can someone provide more detail on how to check these items on a 2003 Bonneville n/a? I am having the gas cap problem and have snaded the filler neck and purchased a new cap. message still on.
"There'* also a purge vent unit you need to clean... I think it'* hooked to one of the lines that goes to the evap canister under the passenger side rear floor board."
"It was the purge canister solenoid causing the problem. The solenoid is mounted on a bracket on top of the engine very close to the firewall"
"There'* also a purge vent unit you need to clean... I think it'* hooked to one of the lines that goes to the evap canister under the passenger side rear floor board."
"It was the purge canister solenoid causing the problem. The solenoid is mounted on a bracket on top of the engine very close to the firewall"
Last edited by RPerry435; Jan 15, 2010 at 06:13 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Spl170s
2000-2005
12
May 8, 2008 06:43 PM
3.8. l67, 3800, bonneville, bonnie, cap, gas, gas cap error code, gas cap message, message, pontiac, se, sle, sse, ssei
