silverbullet, rrounds, anyone else with aftermarket exhaust
#1
BANNED
Thread Starter
Join Date: Mar 2004
Location: Purgatory
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
silverbullet, rrounds, anyone else with aftermarket exhaust
can i see a pic of your Y... thinking about doing 3" all the way back since im more than half way already...
#2
Chadow427 (Shadd) has one as well.
Mine is a Flowmaster. Very good quality even though it is only available in aluminized steel and not stainless. It is 3" in and twin 2 1/2" out but you can go 3" in and twin 3" out like Rod did.
Shadds is twin 2 1/2" also but without any mufflers, just one where the resonator was. It was by far the loudest.
Rods was the deepest sounding but he still had a Cat that would help with the more muted sound. He has the 3" Hooker mufflers.
My 2 1/2" Magnaflow'* were said to sound Ricerish....but I think it just sounds good. There is a slight resonance coming from the air compressor metal cover that resides over the passenger side muffler.
I am thinking of installing a larger volume Resonator to quiet down the part throttle under load drone below 2000 rpm.
Mine is a Flowmaster. Very good quality even though it is only available in aluminized steel and not stainless. It is 3" in and twin 2 1/2" out but you can go 3" in and twin 3" out like Rod did.
Shadds is twin 2 1/2" also but without any mufflers, just one where the resonator was. It was by far the loudest.
Rods was the deepest sounding but he still had a Cat that would help with the more muted sound. He has the 3" Hooker mufflers.
My 2 1/2" Magnaflow'* were said to sound Ricerish....but I think it just sounds good. There is a slight resonance coming from the air compressor metal cover that resides over the passenger side muffler.
I am thinking of installing a larger volume Resonator to quiet down the part throttle under load drone below 2000 rpm.
#3
Senior Member
Posts like a Northstar
Join Date: Feb 2003
Location: Sacramento, CA WCBF '06, '07 survivor
Posts: 658
Likes: 0
Received 0 Likes
on
0 Posts
Paul has the best pics, so you know what to get.
Hooker Aero Chamber mufflers is what we have
p/n 21505 3" in and out (what we have) or
p/n 21502 2 1/2" in and out. $59 at Jeg'* for the
2 1/2" or the 3" , get the 3" mufflers.
NO RICE SOUND with these mufflers.
ROD
Hooker Aero Chamber mufflers is what we have
p/n 21505 3" in and out (what we have) or
p/n 21502 2 1/2" in and out. $59 at Jeg'* for the
2 1/2" or the 3" , get the 3" mufflers.
NO RICE SOUND with these mufflers.
ROD
#4
BANNED
Thread Starter
Join Date: Mar 2004
Location: Purgatory
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
did you guys order your Y online? pay something close to this?
http://store.summitracing.com/partde...5&autoview=sku
i think i like rods exhaust the best... are they black rod?
http://store.summitracing.com/partde...5&autoview=sku
$60 each is a lot considering i have to get 2 of them... what about a cheaper option of something like this
http://store.summitracing.com/partde...0&autoview=sku
rod, how did you know to get hooker, or did you just get them hoping they sounded right?
also, ABOUT how much 3" stainless do i need to buy to make it from the back of the cat to the Y?
http://store.summitracing.com/partde...5&autoview=sku
i think i like rods exhaust the best... are they black rod?
http://store.summitracing.com/partde...5&autoview=sku
$60 each is a lot considering i have to get 2 of them... what about a cheaper option of something like this
http://store.summitracing.com/partde...0&autoview=sku
rod, how did you know to get hooker, or did you just get them hoping they sounded right?
also, ABOUT how much 3" stainless do i need to buy to make it from the back of the cat to the Y?
#5
Senior Member
Posts like a Northstar
Join Date: Feb 2003
Location: Sacramento, CA WCBF '06, '07 survivor
Posts: 658
Likes: 0
Received 0 Likes
on
0 Posts
yes my mufflers are black
on your y pipe get one with 3" in and out if you want to go 3" all the way out
i got my y pipe at the muffler shop.
i have no way of knowing how the Force Pro-Series mufflers sound
i had Hookers on my dragster back in the 70'* and am old school,
dont like the sound of most Flowmaster mufflers. plus i like to think outside
the box (you saw my intake) to be different. i had an idea how Cindy'*
car would sound before i bought them.
if you have more ? give me a call
God this is a lot of typing (hunt and peck) for me.
ROD
on your y pipe get one with 3" in and out if you want to go 3" all the way out
i got my y pipe at the muffler shop.
i have no way of knowing how the Force Pro-Series mufflers sound
i had Hookers on my dragster back in the 70'* and am old school,
dont like the sound of most Flowmaster mufflers. plus i like to think outside
the box (you saw my intake) to be different. i had an idea how Cindy'*
car would sound before i bought them.
if you have more ? give me a call
God this is a lot of typing (hunt and peck) for me.
ROD
Thread
Thread Starter
Forum
Replies
Last Post
its840
Your Other Rides: Pics & Videos
10
09-02-2006 03:08 AM
driverjohn2005
Your Ride: GM Pictures & Videos
14
08-05-2005 01:36 AM