I had posted awhile ago that my brake pedal felt like it was pulsing and I had a front end shimmy when I applied the brakes at 55 MPG and over. Two things that I found out and have corrected. One was a warped rotor and the other was a wheel hub that was bad. I believe the bad hub caused the warped rotor. I have since replaced both hubs and have new EBC rotors and ceramic pads on all fours! Life is now good!

glad to hear you got it all sorted out

I've seen a lot of warped rotors. They just don't last as long anymore. Replacing them is cheap now. No need to have them cut anymore

Which EBC rotors did you use, 3GD (dimple/slot) or the USR (slotted) ? Think I might have to do the same as you and change hubs, rotors and pads. I really like the ECB redstuff ceramic pads, got them on my Fiero.

what do you mean cut the rotor?

jk

last one I had cut was back in 97

I used the 3GD and ceramic pads. I'm really happy with it and it was an easy install. The hubs required some impact wrenches and I ended up having the dealer replace them, but I supplied the parts.