I was wondering if any of you have swapped out one of these, and what kind of troubles will i face if i decide to do so.

http://cgi.ebay.com/ebaymotors/ws/eB...085933425&rd=1

I think that Haro just purchased one from Ed. I don't know if he has installed it yet, or notl

I guess I'll wait for haro to chime in then.

In the meantime...these are the instructions.
Brake Pressure Modulator Valve (BPMV) Replacement

Just curious, but why are you needing to replace this? What are your symptoms?

well when i was talking to the mechanic, we pinpointed the problem to be that. We were getting faulty signals when the car was in park from the right front wheel sensor and this is after changing the wheel hub and harness. It was showing on the tech2 that the wheel sensor was sending the ABS module a 1-3mph reading and changing at every second.

as soon as I know, you will know

http://www.bonnevilleclub.com/forum/...ic.php?t=91480

*fingers crossed*

when connected to the Tech2, I had a laundry list of history codes of all the WSS'* not working. When we went to the live mode, I watched 3 of the WSS'* work fine, while the other was off by a couple miles per hour. It depended on the day, which WSS was going to fail, according to the EBCM.

When I talked to Ed'* guy on the phone, he needed my VIN because according to him, there are 7 different ones available and we had to match the numbers.

Hmm interesting fact to know, is there a way you can PM me the number so i can give ED a call?

Pm sent