02 bonnie lights?
There is a relay in the under hood fuse block that you pull, then install a jumper in. I was trying to look up my old posts that say which one because I have none of my stuff over here in Iraq.
Relay number 30 in the underhood fuse block. You also have to jumper two of the connections for the highs to work right.
http://www.lightsout.org/disable.html#GMspec
Scroll down until you find 2000-2005 Bonneville
http://www.lightsout.org/disable.html#GMspec
Scroll down until you find 2000-2005 Bonneville
Or in other words -
2000-2005 Pontiac Bonneville Remove relay #30 in the fuse panel under the hood. For the high beams to work correctly a jumper wire should be ran from 87a to 30 where the relay would normally be. If this isn't done the driver'* side high beam will not operate.
2000-2005 Pontiac Bonneville Remove relay #30 in the fuse panel under the hood. For the high beams to work correctly a jumper wire should be ran from 87a to 30 where the relay would normally be. If this isn't done the driver'* side high beam will not operate.
Thread
Thread Starter
Forum
Replies
Last Post
19bonnie95
Detailing & Appearance
14
Nov 29, 2005 07:41 PM
gene254
1987-1991
3
Jul 7, 2004 08:42 AM
Glasuan
Everything Electrical & Electronic
8
Feb 25, 2004 05:05 PM







