Question
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Feb 2003
Location: Ontario,Canada
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
Question
Heyy
My friend has a 2000 bonnie sei and he asked me if there was a way to program another keyless entry/lock to work on his car also he said there is something in his manual that says he can program another key from his ignition without going to the dealer is this correct??
Thanks Mazee
My friend has a 2000 bonnie sei and he asked me if there was a way to program another keyless entry/lock to work on his car also he said there is something in his manual that says he can program another key from his ignition without going to the dealer is this correct??
Thanks Mazee
#2
Senior Member
True Car Nut
Join Date: Oct 2002
Location: Groton, CT _NEBF 05, 06, 07_
Posts: 2,703
Likes: 0
Received 0 Likes
on
0 Posts
He should have two controllers (key fobs), one is for driver 1, the other for driver 2. They can both be programmed & personalized through the Driver Information Center (DIC). Is this what he'* referring to?
#3
Senior Member
Posts like a Camaro
Join Date: Aug 2004
Location: Boca Raton, FL
Posts: 1,101
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by markwb
He should have two controllers (key fobs), one is for driver 1, the other for driver 2. They can both be programmed & personalized through the Driver Information Center (DIC). Is this what he'* referring to?
I think Mark what he is asking is if he can get a new remote that did not come with the car & program it w/out going to the stealers. I may be incorrect.
Originally Posted by Mazee
also he said there is something in his manual that says he can program another key from his ignition without going to the dealer is this correct??
#4
Senior Member
True Car Nut
Join Date: Jun 2003
Location: Purgatory
Posts: 6,313
Likes: 0
Received 0 Likes
on
0 Posts
You can synchronize an existing fob when the battery goes dead but you have to reprogram a new fob if it has never been sync'd before and this done with a tech 2 scanner at the dealer.
To resync the fob press and hold both the lock and un-lock at the same time for 7 sec.
you should be within 5 ft of the car.
To resync the fob press and hold both the lock and un-lock at the same time for 7 sec.
you should be within 5 ft of the car.
#7
Senior Member
Certified Car Nut
Join Date: Oct 2003
Posts: 19,756
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BillBoost37
00+ guys...can't we use a procedure from techinfo to program in a new FOB instead of needing a Tech 2?
#8
Senior Member
Posts like a 4 Banger
Join Date: Sep 2005
Location: Okc, OK
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
To program a new key fob it has to be done with a Tech 2 on the 00+. You can resynchronize them by standing with in 5 feet of vehicle and hold lock and unlock at the same time for 7 sec. The door locks will cycle to confirm they sync'd.
Thread
Thread Starter
Forum
Replies
Last Post
nagel79
Audio (and aftermarket electronics)
4
07-09-2006 10:14 AM
ten_gigahertz
2000-2005
15
03-11-2006 09:07 AM
CraZyDriVer868
Audio (and aftermarket electronics)
4
10-31-2003 03:19 AM