00-03 hoods
Thread Starter
Junior Member
Posts like a Ricer Type-R
Joined: Dec 2004
Posts: 18
Likes: 0
From: Nashua, NH

Are the hoods the same for all the years listed and for all models? I'm looking at a 03 SSEI that needs a hood and was wondering if one off other years and models will fit. Thanks.
Originally Posted by Pronto
Are the hoods the same for all the years listed and for all models? I'm looking at a 03 SSEI that needs a hood and was wondering if one off other years and models will fit. Thanks.
Senior Member
Posts like a 4 Banger
Joined: May 2006
Posts: 120
Likes: 0
From: Cornwall, Ontario, Canada

Originally Posted by toastedoats
Originally Posted by Pronto
Are the hoods the same for all the years listed and for all models? I'm looking at a 03 SSEI that needs a hood and was wondering if one off other years and models will fit. Thanks.
Senior Member
Posts like a Camaro
Joined: Apr 2004
Posts: 907
Likes: 0
From: Sioux Falls, SD. Member #2387

Originally Posted by garblin
Originally Posted by toastedoats
Originally Posted by Pronto
Are the hoods the same for all the years listed and for all models? I'm looking at a 03 SSEI that needs a hood and was wondering if one off other years and models will fit. Thanks.
My understanding (no fact to back it up) was that this was only a 00/01 issue. But I don't follow the issues well enough with the 2k hoods to know for sure, so correct me if we've seen an 02 do this.
Originally Posted by willwren
My understanding (no fact to back it up) was that this was only a 00/01 issue. But I don't follow the issues well enough with the 2k hoods to know for sure, so correct me if we've seen an 02 do this.
maybe it was an early model..?
My 02 has it under front edge too. Didn't make it to the top yet. It seems to start at the seam where the outer "skin" meets the inner structure. Mine is about an inch and a half wide at the widest point and three quarters of the way across.
Senior Member
Posts like a Corvette
Joined: Nov 2005
Posts: 1,201
Likes: 1
From: Hamilton, Ontario , Canada

Originally Posted by bluebullet
My 02 has it under front edge too. Didn't make it to the top yet. It seems to start at the seam where the outer "skin" meets the inner structure. Mine is about an inch and a half wide at the widest point and three quarters of the way across.


