Wiring Harness Above Headliner in 94SE - GM Forum - Buick, Cadillac, Chev, Olds, GMC & Pontiac chat


1992-1999 Series I L27 (1992-1994 SE,SLE, SSE) & Series II L36 (1995-1999 SE, SSE, SLE) and common problems for the Series I and II L67 (all supercharged models 92-99) Including Olds 88's, Olds LSS's and Buick Lesabres Please use General Chat for non-mechanical issues, and Performance and Brainstorming for improvements.

Reply
 
 
 
Thread Tools Search this Thread
Old 11-26-2004, 09:50 AM   #1
Member
Posts like a V-Tak
Thread Starter
 
Join Date: Jun 2003
Posts: 98
Thanks: 0
Thanked 0 Times in 0 Posts
mikeblue94 is on a distinguished road
Default Wiring Harness Above Headliner in 94SE

I will be reinstalling the headliner board in my 94SE soon. I have a question regarding the best way to reinstall the wiring harness that runs the sunroof switch, fog lights, and grab handle courtesy lights.

Is it preferable to fasten the harness to the headliner board first with like electrical tape and then when you get the baord into the car make the last connection on the driver'* side "A"pillar OR should I just tape the harness to the roof in various places and the bring the board in.

It appears that the harness was originally attached to the baord but I didn't know if that was a must.

I know Harofreak and Randman1 have done this, maybe they will have some ideas.

Any other tips will be welcome as well.

Regards.

Mike in Alabama
mikeblue94 is offline   Reply With Quote
Old 11-26-2004, 09:59 AM   #2
Senior Member
True Car Nut
 
Join Date: Feb 2004
Location: Western MA
Posts: 2,708
Thanks: 0
Thanked 1 Time in 1 Post
randman1 is on a distinguished road
Default

That'* a good question... I was thinking the same thing when I did mine. In the end, I ended up attaching the harness to the headliner with black duct tape but without the staples. Essentially the way it was done from the factory. I did, however, leave more slack for the rear grab handle wiring to make it a little easier to reconnect them.

I suppose it is just a preference thing.

Please post some pics when you are done so we can see.
randman1 is offline   Reply With Quote
Old 11-26-2004, 08:34 PM   #3
Junior Member
 
Join Date: Mar 2004
Location: Purgatory
Posts: 0
Thanks: 0
Thanked 0 Times in 0 Posts
harofreak00 is on a distinguished road
Default

i think i used a couple piece of duct tape, nothing fancy...it really doesnt matter...
harofreak00 is offline   Reply With Quote
 
 
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
Trimming Headliner before Installation into 94SE mikeblue94 1992-1999 2 11-26-2004 08:22 PM
Getting Headliner Board back in 94SE mikeblue94 1992-1999 7 11-09-2004 02:06 PM
Do It Yourself Headliner Replacement on 94SE w/sunroof? mikeblue94 1992-1999 1 08-05-2004 10:25 AM
Wiring Diagram for 94SE Stereo Harness mikeblue94 Audio (and aftermarket electronics) 7 03-30-2004 10:13 AM
wiring harness for 90 shortstuf212559 Audio (and aftermarket electronics) 2 04-15-2003 11:06 PM


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -4. The time now is 10:22 AM.


We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.