I have found a Long block for a 95 Buick. Am wondering if all my series one parts will bolt up, or do I need series 2 stuff for it.
Am talking, manifolds, intakes ETC
here are the block and head numbers incase they help.
Heads are 2136, block is 24502441, crank is 2170. there is also a tag on the side of the block that is stamped 1340015d 030 010 020. I assume this is .030 overbore, .010 and .020 crank

This motoris on EBAY at moment and am thinkin if my stuff will bolt up could be a good buy for me.

Cheers AJ

Intake and exhaust manifolds from a Series I will not bolt to a Series II, and vice versa.

Is the 95 NA or SC? A 95 SC will be fine.

it doesn't say if it was SC or N/A. it is a NAPA Long Block, never been installed. thats why i gave block and head numbers as someone may be able to shed more light as to what it is and if I can use it.
They are askin $495 for it IF I remember correctly

AJ

I don't know the part numbers, but if you got a link to the auction, I can tell if it'* Series I or II from the pics.

here'* the ebay listing

http://cgi.ebay.com/ebaymotors/Napa-...QQcmdZViewItem

That'* a Series II longblock.

Series II. Your LIM runners won't all line up, nor will your exhaust manfolds.

so would need new lower mahifold and exhaust manifold......anything else......tryin to work out if this could be a good option. Thanks

AJ

You'd need a UIM, TB, air intake, accessory brackets, PCM reprogram to calibrate the MAF/TB combo to the Series I PCM, fuel rail, injectors probably...

Find another option.