Wheel Bearing!
Thread Starter
Senior Member
Posts like a Turbo
Joined: Jul 2009
Posts: 372
Likes: 0
From: Flint, MI
Wheel Bearing!
OK so last week started to faintly hear a noise... it later got worse and is now a little annoying whirling sound.
Pretty sure its a wheel bearing (unbelievable) one thing after another
So stock OEM or aftermarket replacements or any upgrade parts?
Pretty sure its a wheel bearing (unbelievable) one thing after another
So stock OEM or aftermarket replacements or any upgrade parts?
Retired Senior Admin
Expert Gearhead
Joined: May 2006
Posts: 29,661
Likes: 40
From: Sheboygan Wisconsin
Senior Member
Posts like a Corvette
Joined: Feb 2009
Posts: 1,511
Likes: 0
From: Jersey Shore
Bearing is really easy to fix too. unless the abs sensor housing gets stuck. but a good punch and hammer will take care of that. forget the torque bolt size but might as well by a set that goes up to T50
Senior Member
Posts like a Northstar
Joined: Jan 2006
Posts: 598
Likes: 0
From: Valley Forge, PA
If you run into a problem pulling the hub with everything off, Rice Central.. er.. AutoZone has a puller you can get on a free lend. Saves a lot of pounding and swearing. Sometimes when they fail, they generate a great deal of heat and really get stuck with the spindle. You pull it out of the housing and the spindle comes with it. The puller gets it out nicely, and leaves the spindle where it should be.
Thread
Thread Starter
Forum
Replies
Last Post
