My Front Passenger side Wheel Bearing is howling... Do I have to buy the whole assembly or can I grease the ones I have:??

I'm pretty sure you have to buy a new hub assembly. The hubs are non serviceable.

U can make it eaiser on your self and just order a spindle assembly from your local salvage yard....they leave the hub bearing in it. Less mess and less time and hassle....I think.

I can get a new hub and bearing for 77 bucks.... I was just wondering if I could grease the lod one or is it sealed.

Most yards only want about 35-50 bux for a spindle assembly with a bearing in it. We sell'em here where I work left and right.

Sealed for life, non-servicable. And use a new bearing. Putting a used one on is like buying used tires or struts. That big of a job deserves a new part.

Thats not too bad, I just bought one for a 2k and it was $290 (cdn) :?

Yeah Ive seen them for 160+ I got lucky I can get it for very little above cost.

The '93 SSE that I work on had the passenger side bearing go first, then about a year and a half after that, the driver'* side went. Be prepared to use a fair amount of torque to break the spindle nut loose. If a new nut doesn't come with the bearing, you may want to purchase one. It'* generally recommended that a new one be used rather than reuse the old one.

I got some good sized guns I think I can handle it