What are you running for front brakes?
I have Bendex front brake pads, paid 39.00 for them w/life time warranty.
But they sweek really bad
I can return them but I do not want Bendex again.
What do you have for front brakes and are they noisy?-Toddster
But they sweek really bad
What do you have for front brakes and are they noisy?-Toddster
Senior Member
True Car Nut
Joined: May 2003
Posts: 8,135
Likes: 1
From: Lethbridge, Alberta, _______Canada._______ West Coast Bonneville Fest ___05,06,07 Survivor___

I belive mine are just Wagners. Cheaper price, quiet, cant complain. However for ultimate stopping power, grab up some power slot rotors and ceramic pads
I bought the cheapies from autozone for the 95. I paid $10.00 for the front pads. Mine is going to need new rotors after the winter. I just put these pads on to get it by NYSI. They actually stop quite well. If you looking for a real decent brake pad then go with the ceramic pads. I have them on the Legend, and have no complaints at all. Hardly no brake dust at all from them.
Bendix Ceramics on stock rotors. No noise, very low dust and no warpage. ps..no anti squeak on backs..they have the shims built in.
Very happy.
Squeaks can be caused from pad compositiion and glazing etc. Try doing a day or so of harder than usual stops. Abuse them a little and see if they don't clean up on their own.
Very happy.
Squeaks can be caused from pad compositiion and glazing etc. Try doing a day or so of harder than usual stops. Abuse them a little and see if they don't clean up on their own.
Performance friction carbon metallics on the 90 - Awsome, no noise, stop well, no longer eats pads and rotors.
Carquest / Raybestos on the 96 (came with) still working great after 3 yrs. No noise, no warping, great stopping power. The rear brakes on this car seem to never need replacing.
Carquest / Raybestos on the 96 (came with) still working great after 3 yrs. No noise, no warping, great stopping power. The rear brakes on this car seem to never need replacing.
Thread
Thread Starter
Forum
Replies
Last Post
SSEimatt93
General GM Chat
0
Nov 15, 2003 10:55 PM
Sasage
Audio (and aftermarket electronics)
11
Jun 18, 2003 02:20 PM






