What to change for a good tune-up?
Thread Starter
Senior Member
Posts like a 4 Banger
Joined: May 2007
Posts: 128
Likes: 0
From: Belmont, Wv

I've got 81,500K on the N/A motor
I just did the oil and filter...
Thinking I need to do Plugs and Wires, PCV, Fuel Filter, Air Filter....
What else do I need to check/change?
Is there any brand that gives more performance thats not expencive?(more for plugs and wires)
I just did the oil and filter...
Thinking I need to do Plugs and Wires, PCV, Fuel Filter, Air Filter....
What else do I need to check/change?
Is there any brand that gives more performance thats not expencive?(more for plugs and wires)
AC Delco or NGK plugs. Never Bosch.
Belden Premium wires from NAPA.
O2 sensor (front only) if it'* original. They start getting tired around 60k.
Pull the TB (per Techinfo) and clean it, the MAF sensor, and the IAC valve/passage/seat.
Belden Premium wires from NAPA.
O2 sensor (front only) if it'* original. They start getting tired around 60k.
Pull the TB (per Techinfo) and clean it, the MAF sensor, and the IAC valve/passage/seat.
If you clean the TB, make sure you clean the IAC, cleaning mine helped with the rough idle, and Im getting 2 more MPG...
Ditto on everything else Delco plugs, Belden wires=smooth runner
Bob
Ditto on everything else Delco plugs, Belden wires=smooth runner
Bob
Thread Starter
Senior Member
Posts like a 4 Banger
Joined: May 2007
Posts: 128
Likes: 0
From: Belmont, Wv

Originally Posted by BonnevillesSince62
Have the LIM/UIM things been addressed?
I just bought it so I don't know what has been done or not.
Thread
Thread Starter
Forum
Replies
Last Post
notagrampa
Performance, Brainstorming & Tuning
5
May 17, 2008 04:53 PM
repinS
General GM Chat
12
Nov 26, 2004 10:35 AM



