Well, I guess it had to happen sooner or later..
#11
Guest
Posts: n/a
Originally Posted by sonoma_zr2
Got the code, well sort of. Forgot it. Gordy has to email the scan readout. Fun time at MAG
P0336 sounds familiar, but could the crank pos sensor throw an error but still work?
Confirmed, P0336
P0336 sounds familiar, but could the crank pos sensor throw an error but still work?
Confirmed, P0336
According to this code you have no 18x'* reference pulse..
Looks like it could be a bad crank sensor, bad connection at the crank sensor, ICM or PCM.. Not 100% about the possibility of a bad ICM or PCM...
Also says that when this code is set the PCM will command the Traction controll off, and I thik it said that the TC light will illuminate...
I can scan a page or 2 for you if needed...
Good Luck
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
#13
Guest
Posts: n/a
Anyone know how much it is to replace the sensor?
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
#14
Senior Member
True Car Nut
Thread Starter
Join Date: Jan 2005
Location: Montevideo, MN MWBF '05, '06, '07 WCBF '06 '07 survivor
Posts: 3,882
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by jr's3800
I can scan a page or 2 for you if needed...
Good Luck
Good Luck
Car has always started fine, hasn't missed once. Before or after the code.
Stopping by my mech'* place this afternoon, will ask him what I should do.
Is what you said earlier that the car will start and run with a bad crank sensor? As long as it sees a cam signal and what else? (3x- what'* that) Anyway, it does seem to point to crank, right?
#15
Senior Member
True Car Nut
Thread Starter
Join Date: Jan 2005
Location: Montevideo, MN MWBF '05, '06, '07 WCBF '06 '07 survivor
Posts: 3,882
Likes: 0
Received 0 Likes
on
0 Posts
Mech wants a c-note installed for the crank senson.
Local parts store wants 35 for the sensor and 40 for the hb puller.
I'll have to see of one of the MN guys has a puller I can borrow. Maybe we can get together for another mini-meet. Don't have one scheduled till BFest. (that'* along time for us MN guys)
Local parts store wants 35 for the sensor and 40 for the hb puller.
I'll have to see of one of the MN guys has a puller I can borrow. Maybe we can get together for another mini-meet. Don't have one scheduled till BFest. (that'* along time for us MN guys)
#17
Senior Member
True Car Nut
Join Date: Sep 2004
Location: Farmington, Minnesota =MWBF '05 SURVIVOR= =CEBF '06 SURVIVOR= =August '06 COTM=
Posts: 9,130
Likes: 0
Received 0 Likes
on
0 Posts
If anything I might be able to get that puller at Lakeville Checker for free. I got a few connections (and my own commerical account) there lol.
Yes the car will start with the bad crank sensor. If it runs rough then stalls on you, turn the key off, and one out of 6 times the timing will line up right and you'll be able to continue on your journey home.
Yes the car will start with the bad crank sensor. If it runs rough then stalls on you, turn the key off, and one out of 6 times the timing will line up right and you'll be able to continue on your journey home.
Thread
Thread Starter
Forum
Replies
Last Post
GunsOfNavarone
Lounge
13
03-03-2011 10:28 AM
egladman
General GM Chat
19
01-15-2004 05:33 PM