Water Pump Replacement
#1
Water Pump Replacement
Hi
I need to change a water pump on a 1992 Bonneville SE (Vin L). Do I need to remove the engine mount?
Any info or instructions would be appreciated.
Thanks
I need to change a water pump on a 1992 Bonneville SE (Vin L). Do I need to remove the engine mount?
Any info or instructions would be appreciated.
Thanks
#2
DINOSAURUS BOOSTUS
Expert Gearhead
Hi...welcome..
The procedure will basically follow the procedure listed in Techinfo for the supercharged engine.
Only thing that changes is the supercharger on top.
http://www.bonnevilleclub.com/forum/...ght=water+pump
And yes..I believe you do need to support the engine and remove the mount.
The procedure will basically follow the procedure listed in Techinfo for the supercharged engine.
Only thing that changes is the supercharger on top.
http://www.bonnevilleclub.com/forum/...ght=water+pump
And yes..I believe you do need to support the engine and remove the mount.
#3
Senior Member
True Car Nut
Join Date: Nov 2002
Location: Texarkana, Texas
Posts: 6,042
Likes: 0
Received 0 Likes
on
0 Posts
yup, remove the center bolt of the mount, lift the engine by the front lift point until the PS touches the STB and remove both halves.
Simple once you know how to do it.
Simple once you know how to do it.
#5
Member
Posts like a V-Tak
Join Date: Oct 2006
Location: Indiana
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BillBoost37
Dame.. you mean the one bolt that holds the center of the TA mount or the center bolt on the block?
#7
Senior Member
Posts like a Northstar
Originally Posted by BillBoost37
Hi...welcome..
The procedure will basically follow the procedure listed in Techinfo for the supercharged engine.
Only thing that changes is the supercharger on top.
http://www.bonnevilleclub.com/forum/...ght=water+pump
And yes..I believe you do need to support the engine and remove the mount.
The procedure will basically follow the procedure listed in Techinfo for the supercharged engine.
Only thing that changes is the supercharger on top.
http://www.bonnevilleclub.com/forum/...ght=water+pump
And yes..I believe you do need to support the engine and remove the mount.
#8
Senior Member
True Car Nut
Join Date: Nov 2002
Location: Texarkana, Texas
Posts: 6,042
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BillBoost37
Dame.. you mean the one bolt that holds the center of the TA mount or the center bolt on the block?
#9
Junior Member
Posts like a Ricer Type-R
Join Date: Mar 2004
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BillBoost37
Dame.. you mean the one bolt that holds the center of the TA mount or the center bolt on the block?
What is "TA"?
Looks like I'm gonna have to have this done or do it myself. Dripping a lot from the bottom of the crank pully, I had a stream on my Garage floor longer than the car last weekend. That fluid seemed clear, but oily. Just now figured out the coolant leak. After getting the car up on jack stands and busting a wheel stud off.
It'* off to the dealer'* parts department for me.
Jason.