Transmission whine/ Found the issue I think/UPDATE
Guest
Posts: n/a
This is starting to sound not so good.... How many miles on the trans?
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
Guest
Posts: n/a
Might be due for a rebuild or a replacement... Time to get it checked out...
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
Thread Starter
Retired
Certified Car Nut
Joined: Jul 2003
Posts: 17,960
Likes: 1,839
From: Dark Side, AZ











Ok, got the video up now. Beginning, its off, start up its quiet, then it starts whining at around 29 seconds, I give it a couple of revs at 58 seconds and I shut it off.
http://www.kc2jga.com/Transmission.WMV
I will be leaving for work at 3:45 PM. So, don't expect any replies until sometime around 8PM.
http://www.kc2jga.com/Transmission.WMV
I will be leaving for work at 3:45 PM. So, don't expect any replies until sometime around 8PM.
Thread Starter
Retired
Certified Car Nut
Joined: Jul 2003
Posts: 17,960
Likes: 1,839
From: Dark Side, AZ











Well, just got back from work. Almost anyway. It is now completley slipping. Full neutral in all gears. So, what do I need to do? Replace trans, or get a rebuild kit? If I get rebuild kit, I won't mind turning it into a forum project with pictures etc. I just need info on exactly what kind of tools I will need.
Thread Starter
Retired
Certified Car Nut
Joined: Jul 2003
Posts: 17,960
Likes: 1,839
From: Dark Side, AZ











Originally Posted by 1337ssei
rebuilding a fwd automatic transmission can be a nightmare.
Unless you know someone that can do it or has experience I wouldnt even touch it.
go for the used one
Unless you know someone that can do it or has experience I wouldnt even touch it.
go for the used one
Plus, this could be a learning experience for the whole forum. Money is kinda tight at this time, so this would maybe take awhile. Plenty of time to get books, take pictures during the tear down etc. I do believe someone is still looking for more pics for the Tech forum.
Today, I might as well push the car out back and start on taking it apart. So far, the plan is to pull both engine and trans out as one unit. Will keep everyone posted.


