stupid weight ??
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Mar 2005
Location: Prior Lake MN-Glendale AZ
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
stupid weight ??
now this might seem preatty odd to be asking.. but, how heavy would you guys say the block is with the internals still in? could me and my brother lift it out of the car without a cherry picker? i cant get one in time for when i go back to AZ.. but my dad told me i could pull it out so i dont have to do so much work with the engine in the car still.. since i dont live at his home its kool that hell let me keep it in the garage until i come back from AZ.. haha..
#2
Senior Member
Certified Car Nut
Join Date: Oct 2003
Posts: 19,756
Likes: 0
Received 0 Likes
on
0 Posts
if you dont want to pick it out, I would think that you couls drop the subframe and drop the engine and Trans out at the same time??? that might be easier if that can be done
#3
Member
Posts like a V-Tak
Thread Starter
Join Date: Mar 2005
Location: Prior Lake MN-Glendale AZ
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
nah man i just wanna pull it out its in a really bad spot so i dont have much room really.. my dad wants to be able to move the car around if he has to..
#5
Senior Member
Posts like a Camaro
Not only is it iron and heavy, it'* greasy.
Dropping the engine isn't the worrisome party. It'* an injury to those trying to do so.
Rent the cherry picker.
Dropping the engine isn't the worrisome party. It'* an injury to those trying to do so.
Rent the cherry picker.
#7
Member
Posts like a V-Tak
Thread Starter
Join Date: Mar 2005
Location: Prior Lake MN-Glendale AZ
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
ok ok i can lift an IRON V-8 block by myself... me and my bro lift, not saying where insanly strong but ya where preatty strong.. so how much does it way???? cant be more than 500 lbs im leaving tommorow so i cant rent a picker now.. and i have no money
#10
Senior Member
Posts like a Supercharger
Join Date: Dec 2003
Location: Menomonee Falls, WI
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
the way i see it you have two options
option1- you and your brother should pull the engine out with just the two of you, then you can post the Xrays of your hook shaped spine and banged up engine compartment in the lounge!!!!!!!!!!!!!!!!!!!!! lookin fwd to those...
option2- use a dremel tool to cut the left front fender and subframe away from the car and just slide the motor right on out (note, save fender and subframe material, you will need them later)
option 2b- dig a hole big enough for a person and an engine, wheel car over the hole, and you get down in the pit ready to catch the engine, then your brother removes the torque axis mount and then you get ready to catch it, then just dig a ramp and whalla engine is out!!!!
hope this was all kinds of help
nicky
option1- you and your brother should pull the engine out with just the two of you, then you can post the Xrays of your hook shaped spine and banged up engine compartment in the lounge!!!!!!!!!!!!!!!!!!!!! lookin fwd to those...
option2- use a dremel tool to cut the left front fender and subframe away from the car and just slide the motor right on out (note, save fender and subframe material, you will need them later)
option 2b- dig a hole big enough for a person and an engine, wheel car over the hole, and you get down in the pit ready to catch the engine, then your brother removes the torque axis mount and then you get ready to catch it, then just dig a ramp and whalla engine is out!!!!
hope this was all kinds of help
nicky