water pump
#2
Senior Member
True Car Nut
Join Date: Feb 2003
Location: Philly
Posts: 4,508
Likes: 0
Received 0 Likes
on
0 Posts
What exactly do you mean? How do you get the pulley off? How do you replace the waterpump? How does the belt get on the waterpump pulley? Couldn't really get what ur asking.
#3
Junior Member
Posts like a V-Tak
Thread Starter
Join Date: Jan 2004
Location: Canton, MI
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
ok heres the thing my water pump siezed up and i need it to come out so i can get a new one. i can get all of the bolts off but one and its behind a pulley so i was wondering how you get that pulley off so i can take the water pump out
#4
Senior Member
True Car Nut
Join Date: Apr 2004
Location: Three Oaks, Michigan
Posts: 4,879
Likes: 0
Received 0 Likes
on
0 Posts
Well, if you can see the bolt, but can't get to it, chances are you will need to attack it with a cresent or box head wrench. Otherwise, you may be able to use a universal joint through it.. but the box head is the best of the three. Because I believe all our pullies are press fit, and require a special remover, and that wouldn't help any. By any chance do you know the pulley in the way? Could it be the idler? [the idler is the one with the 18mm bolt that you use to apply tension to the belt, or remove tension to remove the belt].
-justin
-justin
#5
Senior Member
Certified GM nut
Join Date: Apr 2003
Location: Davison,Michigan
Posts: 1,867
Likes: 0
Received 0 Likes
on
0 Posts
Here is a link to show you how to change your WP.
http://www.autozone.com/servlet/UiBr...3d8015dc18.jsp
http://www.autozone.com/servlet/UiBr...3d8015dc18.jsp
Thread
Thread Starter
Forum
Replies
Last Post
cjpenny89
1992-1999
3
09-13-2006 11:15 AM