What size torx socket do I need for the brake calipers?
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Jan 2005
Location: lehigh valley, pennsylvania
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
What size torx socket do I need for the brake calipers?
Im going to do the brakes on my 96 sse tomorrow and im wondering what size torx socket to get. thanks.
#3
Guest
Posts: n/a
Take a good look at the caliper bolts... Chances are they will be a 3/8 hex( allen ) bolt... Somewhere along the line GM changed from a Torx T-55 to a 3/8'*... My 95 uses a 3/8'*... good luck
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
#4
Originally Posted by jr's3800
Take a good look at the caliper bolts... Chances are they will be a 3/8 hex( allen ) bolt... Somewhere along the line GM changed from a Torx T-55 to a 3/8'*... My 95 uses a 3/8'*... good luck
#5
93 olds cutlass ciera * caliper star socket size
Just changed the brake pads on my 1993 oldmobile Cutlass Ciera * 3.3L and after all the forums I read dealing with 92 to 95 all said it was a t60 star socket, my 93 infact was a t50 star socket not a t60 or hex but a t50. I hope this helps
someone from avoid all the bs and guessing.
someone from avoid all the bs and guessing.
#6
Retired
You do realize this thread is 13 years old right? Please go back and read the rules that were included in your welcome PM.
__________________
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
Thread
Thread Starter
Forum
Replies
Last Post