Same thing happenned to my 94 in 3 windows and now 2 in my 92. Windows stop working, I check and voltage is there, I remove motor and move the gear a little then all works fine. Anyone else have this happen??

Sometimes the brushes get stuck in the power window motors. Hold the switch on while banging on the door in the vicinity of the motor. This will solve the problem if your brushes are stuck. Chances are that they might get stuck again, though.

3 of my windows did this occasionally when I bought the car. It had sat in a garage for 5 years. All of them are fine, now. If it'* been coming on gradually, something is going south on you. Lubing the tracks will help, too.

Every once in a while, my driver window will not go down. All I hear is clicking noises when I push the button down. It'* probably just bad connectors, cause mine eventually work after I play around with them.

my passenger rear window goes down, but then on the way up it gets stuck. at about the half way point, it makes this clicking/grinding noise that is really loud. it sounds like the gears are grinding. i took apart the door to see if the gears were aligned and they were. i lubbed them up and played with the connections. and after putting the door back together, the damn thing still didnt' work. i can't use that window anymore. any ideas?