92 ssei w/ traction control. ABS light & traction contol light comes on then goes out but will stay on quite awhile. also brake peddle pulsates . any information on possible cause would be greatly appreciated

Here you go:

http://www.bonnevilleclub.com/forum/...t=abs+traction

Check that. Then we can go from there.

Need to have ABS codes scanned. Tell us what ABS codes you have.

thanks , i put a small sunpro code scanner on and nothing showed . looks like i'll have to take to dealership :( to read code $70.00. if i bleed the front brakes it goes out for a few miniutes. sure sounds like sensor in hub. checked on price of new hub w/bearing $130.00 but is sensor built in? is there anyway of checking sensor w/ ohm meter? i know where there is a wrecked 92 but not sure if worth the try to to replace w/ used part. tried to find good mechanics book on ABS but nothing around.

the sensor i dont think is built in

Yes, actually the sensor is part of the front wheel bearing. I'll have to check the ohm-redings, I'm not sure. Easiest way is to pay $70 for the diagnostic and see what the codes and problem are.

93 ssei has 1 front brake that locks up///sometimes...any help??

i just fixed my sons 92 ssei though his abs light was coming on & off & brake peddle would pulsate sometimes. had to change front hub,sensore is built in,checked w/ ohm meter , no resitance. Also had to change caliper, was sticking sometimes . good luck

fuddyduddy121, thanks for your help on ABS BRAKE LIGHT & FRONT HUP input