Long crank to start & stalls on decell
Senior Member
True Car Nut
Joined: Sep 2002
Posts: 3,392
Likes: 2
Code 58:
Pass-Key II Fuel Enable Circuit Signal Lost While Engine Running
I've seen this before - but I don't know a common solution. It may be a loose connection in or around the ignition. Sometimes bad connections at the battery can cause it. Some of your symptoms sound like low voltage problems. This one needs a diagnostic following the dealer manual.
Your other problem could be the IAC valve. What you need to do is use a Tech 1 to command the IAC valve to open anc close and then you can see what happens to the engine. Have you had a tune-up lately? Cleaned the throttle body?
Pass-Key II Fuel Enable Circuit Signal Lost While Engine Running
I've seen this before - but I don't know a common solution. It may be a loose connection in or around the ignition. Sometimes bad connections at the battery can cause it. Some of your symptoms sound like low voltage problems. This one needs a diagnostic following the dealer manual.
Your other problem could be the IAC valve. What you need to do is use a Tech 1 to command the IAC valve to open anc close and then you can see what happens to the engine. Have you had a tune-up lately? Cleaned the throttle body?
Senior Member
True Car Nut
Joined: May 2002
Posts: 2,621
Likes: 0
From: Edmonton, AB Canada
Thread
Thread Starter
Forum
Replies
Last Post
mybonnilaysundertheoceam
Introductions for new members
6
Jun 22, 2018 06:37 AM
jessie_harbin
1992-1999
3
Mar 12, 2006 10:40 AM