yeah.....in my 92 bonneville se i had a F17 AND now i've got a FW2....the drivers side shaft won't fit ...if i get a new shaft, what else do i need to make this work?

any PCM changes?


thanks in advance..


James

ok u can use the shaft from the old trans and use in in the new one....the cool thing is that you acutally got a 3.06 trans instead of the 2.84.....better accelleration with the 3.06

you will need the PCM from the 3.06 trans, then you will be able to run the trans with out a problem

That'* part of the problem..the shaft on the drivers side won't fit....it'* is too small

i hate this car..LMAO

james

hrmm that is weird....

it shouldnt be too hard to get the right parts

what year was the new trans from anyway??

Yeah, I was going to say...at least it'* an upgrade with the 3.06! Good luck getting it to work.

well see that is the problem...i don't know...supposed to be a 92 pontiac bonneville SE

i ordered it through work. From a salvage company. the questions they asked were supercharged and if it had Traction control......i have neither....i don't know whats up.

James

just went and checked again....the shaft indeed does not fit...any ideas guy ...i'm lost

little backstory..3 weeks ago we were rebuilding the engine..and found out it would cost me even more money...so i now have a new motor..and a new transmission...ti'* all in and the shaft won't fit


James

ok tis about time we get the pics goin'

can you take us some shots to see what were working with?

sure can.....first thing 2morrow....


James

oh ya gotta leave us hanging i c how it is.......
dont worry with the gear heads we have round here you should be back on the road in no time!!!!!