Holy soakage
#11
DINOSAURUS BOOSTUS
Expert Gearhead
Originally Posted by trigga_b
thanks for the suggestions. I'll ask willwren if he wants to ride in the trunk and help me out.
#16
Senior Member
Posts like a Turbo
Thread Starter
Join Date: May 2006
Location: Chicago, IL
Posts: 496
Likes: 0
Received 0 Likes
on
0 Posts
yeah its leaking from outside where the antenna sits. I just stuffed it with some paper and put a piece of tape over it until I get another antenna.
#17
Junior Member
Posts like a Ricer Type-R
Is the drain tube hooked up?
Keep in mind, most of us don't mess with the exterior nut and trim bezel when changing antennas. If that'* where yours is leaking from, you'll need to.
Keep in mind, most of us don't mess with the exterior nut and trim bezel when changing antennas. If that'* where yours is leaking from, you'll need to.
#19
Junior Member
Posts like a Ricer Type-R
The drain tube at the bottom of the antenna assembly should be connected between the antenna motor housing and the fender. So the water that leaks in can drain out. Little black tube.
#20
Senior Member
Posts like a Turbo
Thread Starter
Join Date: May 2006
Location: Chicago, IL
Posts: 496
Likes: 0
Received 0 Likes
on
0 Posts
I think I removed that and through it in the field because I thought it was garbage. Unless, that was in my last bonnie, but I'ma go check and see. Oh and you can blame that on the alcohol because I was tipsy when I did it.