High Quality Timing Chain?
Thread Starter
Senior Member
True Car Nut
Joined: Nov 2002
Posts: 6,042
Likes: 5
From: Texarkana, Texas
High Quality Timing Chain?
Does anyone know of one?
Does the Rollermaster INTENSE sells fit?
How about the interupter/cam/crank? Wells a good choice?
Should I go ahead and put a new oil pessure regulator in? 181K and 65psi hot idle on Mobil1 10W-30 Syn...
How about a harmonic.. Mine'* got a crack, I'd like to replace it if it'* not too expensive.
Does the Rollermaster INTENSE sells fit?
How about the interupter/cam/crank? Wells a good choice?
Should I go ahead and put a new oil pessure regulator in? 181K and 65psi hot idle on Mobil1 10W-30 Syn...
How about a harmonic.. Mine'* got a crack, I'd like to replace it if it'* not too expensive.
Senior Member
True Car Nut
Joined: Feb 2003
Posts: 4,508
Likes: 2
From: Philly
Damemorder,
I've got a spare set of timing gears standing by to be measured if you want.
But i don't have a mic or calipers.
The crank gear has 24 teeth and the cam gear has 48 teeth
It looks like this too:
I've got a spare set of timing gears standing by to be measured if you want.
But i don't have a mic or calipers.
The crank gear has 24 teeth and the cam gear has 48 teeth
It looks like this too:
Senior Member
Posts like a Turbo
Joined: May 2003
Posts: 435
Likes: 1
From: B'ham.AL
I think this is for a 3800 II motor but worth reading.
http://www.clubgp.com/newforum/tm.as...de=&*=#1876325
http://www.clubgp.com/newforum/tm.as...mode=1&smode=1
http://www.clubgp.com/newforum/tm.as...de=&*=#1876325
http://www.clubgp.com/newforum/tm.as...mode=1&smode=1
Thread
Thread Starter
Forum
Replies
Last Post
skseattle
Pontiac
2
May 27, 2010 06:44 AM