heater
12-21-2009, 08:16 PM
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Dec 2009
Location: Oconto Falls Wisconsin
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
heater
i drive a 98 sle and when i adjust the heater the digital numbers on the radio trip out and become distorted i was wondering if anyone else has encountered this problem any tips would be greatly appreciated
Last edited by ryangreenberg; 12-21-2009 at 08:42 PM. Reason: title
12-22-2009, 02:07 PM
#2
Retired
Certified Car Nut
Define "adjust the heater" please.
Does this happen when you change the temperature? Mode selection? Or blower speed? And is this a factory radio or aftermarket? Have you recently removed the radio or done any electrical mods of any sort?
Does this happen when you change the temperature? Mode selection? Or blower speed? And is this a factory radio or aftermarket? Have you recently removed the radio or done any electrical mods of any sort?
__________________
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
12-22-2009, 09:11 PM
#4
Retired
Certified Car Nut
Hmmm, got me on that one...
No mods or anything?
No mods or anything?
__________________
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
12-22-2009, 09:18 PM
#6
Retired
Certified Car Nut
Duh, what kind of system do you have? Auto or the 3 **** deal?
__________________
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
12-22-2009, 09:22 PM
#7
Sounds like it might be a bad ground issue here.
Mike ask him if he has checked his ground bus
ground bus corrosion
Mike ask him if he has checked his ground bus
ground bus corrosion
Last edited by Toddster; 12-22-2009 at 09:24 PM.
12-22-2009, 09:29 PM
#8
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Dec 2009
Location: Oconto Falls Wisconsin
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Initially I thought it would be the ground but was not sure if that was at all possible, but I will check it out. Thanks for the tips
Thread
Thread Starter
Forum
Replies
Last Post