Headlights
Thread Starter
Senior Member
Posts like a 4 Banger
Joined: Jun 2005
Posts: 110
Likes: 0
From: Upton, Massachusetts
Headlights
Im replaceing in my 94 SSE. I got 9006 Hi/lo bulbs but when i went to install them i saw that theres 2 sets of bulbs. Which should i replace the inside or the ourside set?
Guest
Posts: n/a
9006 is for the lows, and they are on the outside of the lamp... 9005 will be the highs and that will be the center bulb....
Good Luck
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
Good Luck
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
DINOSAURUS BOOSTUS
Expert Gearhead
Joined: Mar 2005
Posts: 41,391
Likes: 30
From: Enfield, CT
The fogs (original), remove the connector and then rotate the bulb counter clock wise. Remember you are looking at the assembly backwards. Reverse procedure to put the new one in. BIG THING!!! Like the headlights...do not touch the glass of the bulb with your fingers or the oil will cause them to burn hotter and burn out in record time.
Senior Member
True Car Nut
Joined: Jun 2002
Posts: 3,266
Likes: 1
From: Bedroom, Ontario
http://www.ontariobonnevilleclub.com...opic.php?t=248
or replace your fogs with 885'* stead of standard 880'*.. but be forwarned bout possible burnin of the lens if it'* plastic.. or if you're planning on a lot of stop and go rush hour style traffic that may not have enough air to cool it down some.
or replace your fogs with 885'* stead of standard 880'*.. but be forwarned bout possible burnin of the lens if it'* plastic.. or if you're planning on a lot of stop and go rush hour style traffic that may not have enough air to cool it down some.
DINOSAURUS BOOSTUS
Expert Gearhead
Joined: Mar 2005
Posts: 41,391
Likes: 30
From: Enfield, CT
Originally Posted by Drifter420
http://www.ontariobonnevilleclub.com/forum/viewtopic.php?t=248
or replace your fogs with 885'* stead of standard 880'*.. but be forwarned bout possible burnin of the lens if it'* plastic.. or if you're planning on a lot of stop and go rush hour style traffic that may not have enough air to cool it down some.
or replace your fogs with 885'* stead of standard 880'*.. but be forwarned bout possible burnin of the lens if it'* plastic.. or if you're planning on a lot of stop and go rush hour style traffic that may not have enough air to cool it down some.
Senior Member
True Car Nut
Joined: Jun 2002
Posts: 3,266
Likes: 1
From: Bedroom, Ontario
Originally Posted by BillBost37
Originally Posted by Drifter420
http://www.ontariobonnevilleclub.com/forum/viewtopic.php?t=248
or replace your fogs with 885'* stead of standard 880'*.. but be forwarned bout possible burnin of the lens if it'* plastic.. or if you're planning on a lot of stop and go rush hour style traffic that may not have enough air to cool it down some.
or replace your fogs with 885'* stead of standard 880'*.. but be forwarned bout possible burnin of the lens if it'* plastic.. or if you're planning on a lot of stop and go rush hour style traffic that may not have enough air to cool it down some.
Hey buddy
Drive by posting.. I come here whenever I get some time
Thread
Thread Starter
Forum
Replies
Last Post
Nite Wizard
1992-1999
13
Nov 15, 2002 12:57 AM
