these are the codes:
A011
A021
A031
A045
A046
A071

they said they tried to clear them, but they would not clear. they think its the EBCM... any ideas?

Nearly every mechanic I've talked to including my buddy says it'* probably a ECM when they scan. It'* the easiest thing and I bet there were many honest failures.

Those codes (I didn't look them up) probably represent 1 ground being sensed by the ECM

well code 71 means Internal EBTCM error

when i got my car i had it scaned (i seam to reconize some of your codes from my scan) and they also could not ne cleared...what i did was whent around under the car and cleaned all the WSS conections (and sauldered a broken WSS wire). doing this seamed to fix the problem with my abs...(works fine now beleave me )

well i've already checked all WSS connections

oooooooh WillWren? you've gotta know 'bout this......

Have you checked the wires going to the connectors? My 95 has an intermittent problem with TC. I'm postive it'* related to one wire being broken.

MmmmHmmmm checked every connection,. and cleaned the connectors

according to the codes, every single wheel sensor is dead, the EBCM has a internal problem, the Input/Output valves have failed. and my chiltons doesnt say was A011 is...