How many greese fittings are there on my 95 SE? I only found the ones on the tie rod ends.

Not sure the total, but there are also grease fittings on the Upper and Lower Ball joints. I know there aren't hundreds, so just search around. A lot may be covered in dirt if it has been a while since they were greased.


-justin

I checked the rack but didn't see anything. The inboard ball joints have rubber boots on them.

Should be two per wheel front and rear. Lower ball joint and tie rod at each wheel.

Only on replacement bushings. The factory one'* are sealed.

I've had three bonnevilles 2-95'5 and the 96 i drive now, and all three have grease fittings. My 92 grand prix had sealed fittings.