Last topic that I think i need to know about. Im tierd of the gas gauge moving when i get on the gas or make a turn. i no that it is a floater, but is there anyway i can improve it so that it doesnt change as much and stays in 1 spot? thanks

The baffles in the 92-93 tanks were known to break loose. (92 more than 93..but it happens) and that helps slosh. However.. I've noticed the 92-95'* slosh around more than the newer style. I believe the newer had a maximum amount of moving in a certain timeframe to keep you from seeing it.

92 tanks had fewer baffles. We refer to these as 'un-baffled'.

93 tanks have been known (a couple or three) to crack or break baffles.

HOWEVER, my 95 SLE moves around a bit more than my 93 SSEi, even though the SSEi has cracked baffles.

Some do, some don't. Call it normal.

my gas gauge also moves down when i slow down and then goes back up when i hit the gas and go a lil fast. sorta like the oil pressure gauge.. is there anyway to fix this.. ? its on my 95 se

Read my post above.

My 95 like Bill mentions above with his...was worse than probably any other year I've seen.

so this is considered normal you are saying? even if the needle goes from a quarter tank to almost half a tank with a lil speed? thanks

Sleeper93 - Please add your year and trim level to your signature line. You can do this by clicking on the Profile link at the top of the page.

It will help us help you!

Yes.. quite normal and you may see even more of a swing if you take off fast or brake quickly.