hello bonne club members!

I got a prob and i have had it for a while, the front right side of my sway bar, where it connects to the suspension is cracked, to be exact the crack which is now broken when i checked. it is still connected but one of the forks is broken, heres some picutres of the bar, my question is can i replace this front bar and hardware without moving the exahuset down pipe or rack and pinon or any other major component? any suggestions would be greatly appriciated,

PS i have searched for this topic "sway bar" and come up with the preformace upgrades and the rear replacement........ but i have not seen my issue

Thanks,
Nickyyyyyyyyyyyyy

I think Sol broke a sway bar on his GP, time to upgrade to the 32mm unit

Replace it. And the endlinks.

thanks for the fast replies.... is pulling that sway bar out of there going to be an insane job or can it be done within a few days using a floor jack and jack stands?

nick :?:

One day, make sure you have a hack saw or reciprocating saw.

I've got a 93 SE front bar, if you want, PM me.

I don't have too much advice for the install, but I feel your pain. I broke mine last December taking a hard turn. The one I have now won't break.

thanks for the offer jwikoff99, but i think i may upgrade to the larger mm size, both front and back, to ensure it does not break..........

hack saw....check
couple days......check
6 pack of Genuine Draft....check
new bars and hardware....going to get


thanks guys for the responses......

nicky ill post pics when completed!!!!!

If its not too hard to pull I might have a FE2 front swaybar available for a small fee. From my 1997 SSE parts car.
Be sure to get polyurethane end-links for the reinstallation. You WILL NOT regret it.

I think ill take that advice, is the FE2 the best suspension with the 1 1/4 sway bar???/


and the polyurothane end-links

yes the FE2 is a 32mm bar, and DO the endlinks