ECC display reads - - - and doesnt respond**UPDATE**
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Aug 2005
Location: Clarkston, Michigan
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
ECC display reads - - - and doesnt respond**UPDATE**
Blows from windshied vents only on high and doesn't respond to any buttons. Just happened all of a sudden while driving. Any ideas?
Thanks
Bonne spent 3 days at the dealer. They put in a new ECC control panel and immediately smoked it. Then spent a day chasing shorts in wiring harness. They ended up replacing the control panel, ECC programmer, wiring and vacuum harness. The warranty I bought just paid for itself in one trip to the service dept!
Thanks
Bonne spent 3 days at the dealer. They put in a new ECC control panel and immediately smoked it. Then spent a day chasing shorts in wiring harness. They ended up replacing the control panel, ECC programmer, wiring and vacuum harness. The warranty I bought just paid for itself in one trip to the service dept!
#3
DINOSAURUS BOOSTUS
Expert Gearhead
Whoa... 1993 Sle you know better.
Jeep, it'* long..but extremely informative. Read the whole thread below. Basics are it'* probably a vacuum probllem. If it is the programmer there is a fix in that thread as well. If you are a little mechanically inclined or even declined. The thread should show you it'* very easy to check out and fix.
http://www.bonnevilleclub.com/forum/...ic.php?t=38457
Edit: Fixed...I'm wondering is an admin or two was having fun?
Jeep, it'* long..but extremely informative. Read the whole thread below. Basics are it'* probably a vacuum probllem. If it is the programmer there is a fix in that thread as well. If you are a little mechanically inclined or even declined. The thread should show you it'* very easy to check out and fix.
http://www.bonnevilleclub.com/forum/...ic.php?t=38457
Edit: Fixed...I'm wondering is an admin or two was having fun?
#4
Senior Member
True Car Nut
Join Date: May 2005
Location: _Phoenix, AZ_ _WCBF '05, '06, '07 Survivor_ ____NEBF '07 Remnant___
Posts: 3,448
Likes: 0
Received 6 Likes
on
6 Posts
Originally Posted by BillBoost37
Whoa... 1993 Sle you know better.
Jeep, it'* long..but extremely informative. Read the whole thread below. Basics are it'* probably a vacuum probllem. If it is the programmer there is a fix in that thread as well. If you are a little mechanically inclined or even declined. The thread should show you it'* very easy to check out and fix.
http://img.photobucket.com/albums/v2...drunkadmin.gif
Jeep, it'* long..but extremely informative. Read the whole thread below. Basics are it'* probably a vacuum probllem. If it is the programmer there is a fix in that thread as well. If you are a little mechanically inclined or even declined. The thread should show you it'* very easy to check out and fix.
http://img.photobucket.com/albums/v2...drunkadmin.gif
Bill, you O.K? (JeepRat, he'* under a lot of stress lately )
Here is what Bill was trying to direct you to:
http://www.bonnevilleclub.com/forum/...ic.php?t=38457
The only difference is that my ECC displayed temp, but flashed. ECC display of --- may be different. I'll look to see if I can find more info, but start with the link above.
#7
Senior Member
Certified Car Nut
Join Date: Oct 2003
Posts: 19,756
Likes: 0
Received 0 Likes
on
0 Posts
Re: ECC display reads - - - and doesnt respond**UPDATE**
Originally Posted by JeepRat
Bonne spent 3 days at the dealer. They put in a new ECC control panel and immediately smoked it. Then spent a day chasing shorts in wiring harness. They ended up replacing the control panel, ECC programmer, wiring and vacuum harness. The warranty I bought just paid for itself in one trip to the service dept!
Thread
Thread Starter
Forum
Replies
Last Post
big_news_1
Everything Electrical & Electronic
20
04-03-2008 10:07 AM
ajgullery
Everything Electrical & Electronic
2
11-12-2007 11:16 AM