just wondering if there was an easy way for me to change the back 3 plugs on my car, and how to change the wires as well.
Thanx

Up top, reach over the motor give the plug wires a quarter twist and pull straight back.
Change your plug wires one at a time as not lose place of what goes where?

Thanx alot .The problem is that to change the wires I have to find a way to move the oil dip stick to remove the last to wires in the front,any advise on this :?

On a 94? The OIL dipstick, or trans dipstick? You shouldn't have to move anything. It'* a piece of cake. Should take 5 minutes for the front three, maybe 8 minutes for the back.

The OILdip stick is right in front of the wire hold down on the front. Never even tried to change the back ones yet

The bottom edge of the retainer has 2 tabs that lock it to the valve cover and prevent it from coming up.

Release these two tabs (one near each end about 1.5" in from each end), and slide the retainer UP towards you.

Thanx ,Ithought it was a fold down holder.found out about the clips by accident.This is the first FWD car I wanted to work on, the others were RWD F Bodies.
Thanx for the info

its easy i just did it on my car

8 minutes Will...damnnn you slow for a young guy lmao :P kidddin ...its easy to change plugs...try changen` the blower motor ...looks easy ...pain in da butt

Reach for the strut bar from the front of the car, yank yourself up ontop of the radiator, put one hand on the upper intake, and change away!