What is the ohms of the Boost solenoid ?
#1
Junior Member
Posts like a V-Tak
Thread Starter
Join Date: May 2003
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
What is the ohms of the Boost solenoid ?
I have disabled the bugger a while ago (tube bypass) but I’m getting a code 56 again.
20 ohms ? 10 w ?
Hope you can help
20 ohms ? 10 w ?
Hope you can help
#3
Junior Member
Posts like a V-Tak
Thread Starter
Join Date: May 2003
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by fuddyduddy121
Is it plugged in now?
I have a scan tool
But I think there may be and old problem with bad conections
to the EGR. (codes 54 and 55 sometimes and the EGR tests fine)
I just wanted to put a resistor with the right value to fool the computer for the boost
One less problem to look at and I dont even use it.
Thanks!
B
#5
Junior Member
Posts like a V-Tak
Thread Starter
Join Date: May 2003
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
When I clear the codes and start fresh, it seems to only go on when decelerating
But after a short period of time the 56 code stays on most of the time.
Will hard wire the egr wires soon , but I would like to take care of the boost first.
I will guess the boost is 20 to 30 ohms at 10 watts.
But after a short period of time the 56 code stays on most of the time.
Will hard wire the egr wires soon , but I would like to take care of the boost first.
I will guess the boost is 20 to 30 ohms at 10 watts.
Thread
Thread Starter
Forum
Replies
Last Post
Toddster
Trouble shooting + Test Procedures
0
03-21-2009 06:24 PM
88bonnsse
Audio (and aftermarket electronics)
1
12-12-2007 04:52 PM
Lowrider0308
Audio (and aftermarket electronics)
11
05-08-2007 12:28 AM