GM Forum - Buick, Cadillac, Olds, GMC & Pontiac chat

GM Forum - Buick, Cadillac, Olds, GMC & Pontiac chat (https://www.gmforum.com/)
-   1992-1999 (https://www.gmforum.com/1992-1999-91/)
-   -   Charging problems (https://www.gmforum.com/1992-1999-91/charging-problems-290592/)

TonsFun 04-13-2010 07:25 PM

Charging problems
 
I have a 95 SE i have charging issues, New battery, clean cables, and on the 3rd Alternator, after installing the alternator i runs find for about a hour and then the battery gauge dips back down into the red and my warning light go on and i get a beeping noise, after alternator is installed i get about 14.6 volts off the alternator, but after about a hour of driving or idling the alternator with dip down to 11 volt,but will also go back to normal again the alternator voltage acts like a rough idle in a sense with load 11 without load 14 but sometime vise versa.. then after a day goes about 9.8 - 10.7.... but then iit will spike and go up to normal... i am a little stumped I hate to take it to a Electrictan tomarrow is my day off ii can sepnd most of the day looking thru it but i would like to know if there are any "hotspots" to look in first... thanks for reading

Danthurs 04-13-2010 07:30 PM

Check and test all the battery cables, clean both ends of both cables. If you have a bad cable between the battery and the alternator it won't charge the battery.

TonsFun 04-13-2010 07:35 PM

what setting would i use on the multimeter and what would the spec on the wires be about?

Danthurs 04-13-2010 07:40 PM

I have a few tests you can try.
https://www.gmforum.com/trouble-shooting-test-procedures-141/testing-negative-battery-cable-279492/
https://www.gmforum.com/trouble-shooting-test-procedures-141/testing-charging-system-279494/

I never got around to making up a test for the positive cable.

TonsFun 04-13-2010 07:44 PM

Thanks alot bud, hopefully can narrow down the problem i will let you know...

Danthurs 04-13-2010 07:46 PM

If you've been threw multiple alts, and no change, and the battery is good, that only leaves the cables, mainly the positive cable that goes from the battery to the alt.

Tom_Sawyer_Man 04-13-2010 10:21 PM

be sure to check inside of Bat cable end


All times are GMT -4. The time now is 09:30 AM.


© 2024 MH Sub I, LLC dba Internet Brands