Bolt question
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Jun 2006
Location: Wood River, IL
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
Bolt question
Due to my terrible organization I have mixxed up some of the bolts, and I'm trying to figure out which ones go where. I mixxed up the ones from the alternator, a/c compressor, starter, and the rear accesory mount. Since I've replaced the starter a half dozen times I know which ones they are. I just need help figuring out the a/c compressor and the alternator. The new engine came with a rear accesory mount so those I'm not worried about.
The two types of bolts I have that could be for the a/c compressor are as follows. One is about 3 inches long it is a 15mm head and the marking is 98 M. The other one is slightly longer and the very top (near the head) has no tread and I belive it is a 13mm bolt (don't have that one in front of me). I tryed taking a picture, but my stupid expensive camera isn't working right (pics were very blurry). Hopefully someone can figure it out from this description.
The two types of bolts I have that could be for the a/c compressor are as follows. One is about 3 inches long it is a 15mm head and the marking is 98 M. The other one is slightly longer and the very top (near the head) has no tread and I belive it is a 13mm bolt (don't have that one in front of me). I tryed taking a picture, but my stupid expensive camera isn't working right (pics were very blurry). Hopefully someone can figure it out from this description.
Thread
Thread Starter
Forum
Replies
Last Post
ben636
Bonneville GXP/ Northstar Powered Cars
2
06-30-2008 02:22 PM