1992-1999 Series I L27 (1992-1994 SE,SLE, SSE) & Series II L36 (1995-1999 SE, SSE, SLE) and common problems for the Series I and II L67 (all supercharged models 92-99) Including Olds 88's, Olds LSS's and Buick Lesabres Please use General Chat for non-mechanical issues, and Performance and Brainstorming for improvements.

body part for 93 bonnie se

Thread Tools
 
Search this Thread
 
Old Feb 11, 2003 | 01:42 AM
  #1  
stone cold's Avatar
Thread Starter
Junior Member
 
Joined: Feb 2003
Posts: 1
Likes: 0
stone cold is on a distinguished road
Default body part for 93 bonnie se

hi folks,
i am trying to find where i can purschase the plastic connectors that hold the
lower outside panel to the front door drivers side.i own a 93 bonnie se,about 170k,
still runs great love it.if you had a part number that would be great for shopping.
thankz
Reply
Old Feb 11, 2003 | 01:47 AM
  #2  
willwren's Avatar
Junior Member
Posts like a Ricer Type-R
 
Joined: Aug 2002
Posts: 11
Likes: 13
willwren is on a distinguished road
Default

The round white plastic snaps, about 1" in diameter? I'll have to check my magic book at home.....in a couple hours.
Reply
Old Feb 11, 2003 | 08:32 AM
  #3  
DeathRat's Avatar
Senior Member
True Car Nut
 
Joined: May 2002
Posts: 2,621
Likes: 0
From: Edmonton, AB Canada
DeathRat is on a distinguished road
Default Re: body part for 93 bonnie se

Originally Posted by stone cold
hi folks,
i am trying to find where i can purschase the plastic connectors that hold the
lower outside panel to the front door drivers side
.i own a 93 bonnie se,about 170k,
still runs great love it.if you had a part number that would be great for shopping.
thankz
Best advice! Go to an Auto Body shop with a Sample! Cheaper than the Dealer!
But if you are looking for them at a Dealer then try this:
Rocker Panel Retainer (Square) P/N: 25554845
*/D Lower Molding Retainer (Thin) P/N: 25603592
or */D Lower Molding Retainer (rectangular @ leading edge) P/N: 25600989


Originally Posted by willwren
The round white plastic snaps, about 1" in diameter? I'll have to check my magic book at home.....in a couple hours.
That'* the INSIDE Panel Retainers!
Reply
Old Feb 11, 2003 | 01:43 PM
  #4  
willwren's Avatar
Junior Member
Posts like a Ricer Type-R
 
Joined: Aug 2002
Posts: 11
Likes: 13
willwren is on a distinguished road
Default Re: body part for 93 bonnie se

Originally Posted by stone cold
hi folks,
i am trying to find where i can purschase the plastic connectors that hold the
lower outside panel to the front door drivers side.i own a 93 bonnie se,about 170k,
still runs great love it.if you had a part number that would be great for shopping.
thankz
Deathrat is right. A body shop is going to be your best option. I've seen these outside panels come loose (but only once) and it snapped right back on after the owner cleaned up the crud between the panels and in the snaps.

Rat, which one of those p/n'* is the round snap? The round ones are the retainers that hold the bottom of the lower panel on the SSE and SSEi.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
gojo83
General GM Chat
19
May 17, 2007 02:17 AM
tgboulianne
General GM Chat
10
Nov 27, 2006 12:31 PM
marquette97
General GM Chat
10
May 30, 2006 10:48 PM
itdc1
General GM Chat
7
Sep 2, 2004 10:07 AM
DeeGee96SE
Performance, Brainstorming & Tuning
5
Jun 29, 2004 12:21 AM




All times are GMT -4. The time now is 07:06 PM.