Back right window not working,,,
#1
Senior Member
True Car Nut
Thread Starter
Join Date: Jan 2006
Location: NEBF:06,07 | NYBF:06,07 | ONBF:06,07 | CNBF:06 & more............
Posts: 8,029
Likes: 0
Received 0 Likes
on
0 Posts
Back right window not working,,,
My back right window wont go down nor up...
i swoped out my drive switch pannel and still doesn't work..
the switch on the back right door doesn't move it...
when i press the switch it sounds like it might try to move or something..
what might it be???
i think the window might be stuck in place or the moter might be dead..
i swoped out my drive switch pannel and still doesn't work..
the switch on the back right door doesn't move it...
when i press the switch it sounds like it might try to move or something..
what might it be???
i think the window might be stuck in place or the moter might be dead..
#3
Senior Member
True Car Nut
Thread Starter
Join Date: Jan 2006
Location: NEBF:06,07 | NYBF:06,07 | ONBF:06,07 | CNBF:06 & more............
Posts: 8,029
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by wjcollier07
i would say maybe a loose connection or the window motor...as long as your other windows work, it is not the fuse...
#5
Senior Member
Posts like a Camaro
Join Date: Jan 2006
Location: Riverside, CA
Posts: 1,137
Likes: 0
Received 0 Likes
on
0 Posts
Mines weird...once or twice it has not worked for a minute, then worked again. Been meaning to check connections but too busy. I'm guessing loose/corroded connection.
#6
Senior Member
Posts like a 4 Banger
Join Date: Oct 2004
Location: Crete IL
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
did you just wash the car? I took my car to the wash and the back drivers window quit working for like a day or two. soon as it dried out the window worked fine again. I hear a little wind noise at high speed so I think I need to fix the molding
#7
DINOSAURUS BOOSTUS
Expert Gearhead
Intermittent or right after washing issues can usually be cleared up by cleaning connectors and using a little dielectric grease on the connections
#8
Senior Member
True Car Nut
Thread Starter
Join Date: Jan 2006
Location: NEBF:06,07 | NYBF:06,07 | ONBF:06,07 | CNBF:06 & more............
Posts: 8,029
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BillBoost37
Intermittent or right after washing issues can usually be cleared up by cleaning connectors and using a little dielectric grease on the connections
its not a wet thing, it wasn't working when i got the car and i new it befor i got it,
i just got bored last night and decided to ask to see if the was a quick fix
but ill try takeing off the door switch and checking it out tonight...
#10
Senior Member
Certified GM nut
Join Date: Sep 2005
Location: Home Sweet Home in New York
Posts: 2,009
Likes: 0
Received 0 Likes
on
0 Posts
FYI - There'* a vendor on ebay that sells the front motors for the 92-99 bonnies, but he doesn't post the rears since they don't fail as regularly. If you contact him, he'll list one for you.