Any idea on a good OBD 2 reader and a good fuel presure gage
12-28-2004, 07:49 PM
#1
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Dec 2004
Posts: 303
Likes: 0
Received 0 Likes
on
0 Posts
Any idea on a good OBD 2 reader and a good fuel presure gage
I am going to buy a OBD 2 reader,I was looking at the Equus 3100 for $100.00,it reads and gives a code # and you can clear the code and shut the light off too. I figured it would be handy as AutoZone will read it but not clear it for you. Also I would like to have a good fuel preasure gage to check like fuel pumps etc. Thanks for the help!
12-28-2004, 10:36 PM
#2
Senior Member
Posts like a Turbo
Join Date: Jul 2004
Location: Woodstock Ill.
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
I looked into the Equus. After some research I found out that it is nothing more than a fancy code reader. For $40 this one will also read the codes and clear them (which will turn off the check light). If all you want is a simple, cheap way to read and clear codes, this will do the job. I have one an am happy with it. http://www.harborfreight.com/cpi/cta...emnumber=46030
Thread
Thread Starter
Forum
Replies
Last Post
gizmo
Everything Electrical & Electronic
6
07-04-2005 12:13 AM
Merlin 91/97
General GM Chat
5
04-20-2005 07:31 PM
Paulnold
Everything Electrical & Electronic
7
02-08-2004 10:28 AM