Another Ignition Question
Thread Starter
Senior Member
Posts like a Turbo
Joined: Jun 2003
Posts: 228
Likes: 0
From: Upland, Indiana
Another Ignition Question
Once again I was looking through my JEGS catalog and found more stuff that I want. Which plugs should I get? Also which should I get 8 mm or 8.5 mm plug wires? I'm just looking aroung right now, but I plan on getting all of this in the future.
Member
Posts like a V-Tak
Joined: Jan 2004
Posts: 48
Likes: 0
From: Shelton, CT
dude go with the msd superconductor 8.5 mm wires.. they go good with the coils.
as for the plugs if your supercharged and have mods go with the autolite 103'*
supercharged with not so many mods autolite 104'*
or another great plug is the irridium plugs ngk tr55ix is the part number, if you have connections theyre about 6 to 7 bucks a plug
as for the plugs if your supercharged and have mods go with the autolite 103'*
supercharged with not so many mods autolite 104'*
or another great plug is the irridium plugs ngk tr55ix is the part number, if you have connections theyre about 6 to 7 bucks a plug
Junior Member
Posts like a Ricer Type-R
Joined: Aug 2002
Posts: 11
Likes: 13
Either the MSD 8.5'* or the Taylor 8'*. The Taylors come in any color you'd want, including read.
Taylor and MSD wires are widely regarded to be equal in performance. The 8'* may be a little easier to fit into the front retainer, but the 8.5'* will squeeze, too.
Taylor and MSD wires are widely regarded to be equal in performance. The 8'* may be a little easier to fit into the front retainer, but the 8.5'* will squeeze, too.
Senior Member
Certified Car Nut
Joined: Jun 2003
Posts: 15,928
Likes: 1
Thread
Thread Starter
Forum
Replies
Last Post
sellncars
1992-1999
13
Jan 29, 2005 07:58 PM