AC IS CAUSING OIL GAUGE TO HUNT..
Thread Starter
Junior Member
Posts like a Ricer Type-R
Joined: Aug 2003
Posts: 12
Likes: 0
From: Maumelle, Arkansas

HEY GROUP...
well I posted this question earlier about my oil gauge hunting..Well I have found out why. When driving on the interstate without the ac on the gauge holds steady just about on the next mark above the 40 mark (50psi I think) But.. when I engage the ac, the needle will rise to just about that mark and move back down to the position when not running ac.. the oil gauge needle will move back and forth (like the ac clutch is going on and off) until I turn off the ac.. then the needle will fall to just above the mark (50psi) and be steady again.. at idle or deseleration the gauge needle will fall which is normal.. Sooo.. any ideas on the problem.. I know it doesn't hurt, but it'* kinda annoying..Thanks all..
well I posted this question earlier about my oil gauge hunting..Well I have found out why. When driving on the interstate without the ac on the gauge holds steady just about on the next mark above the 40 mark (50psi I think) But.. when I engage the ac, the needle will rise to just about that mark and move back down to the position when not running ac.. the oil gauge needle will move back and forth (like the ac clutch is going on and off) until I turn off the ac.. then the needle will fall to just above the mark (50psi) and be steady again.. at idle or deseleration the gauge needle will fall which is normal.. Sooo.. any ideas on the problem.. I know it doesn't hurt, but it'* kinda annoying..Thanks all..
Thread
Thread Starter
Forum
Replies
Last Post
GunsOfNavarone
Lounge
36
Apr 15, 2010 09:29 PM



